Da

✏️ Editing: local

# Local filesystem mounting			-*- shell-script -*-

local_top()
{
	if [ "${local_top_used}" != "yes" ]; then
		[ "${quiet?}" != "y" ] && log_begin_msg "Running /scripts/local-top"
		run_scripts /scripts/local-top
		[ "$quiet" != "y" ] && log_end_msg
	fi
	local_top_used=yes
}

local_block()
{
	[ "${quiet?}" != "y" ] && log_begin_msg "Running /scripts/local-block"
	run_scripts /scripts/local-block "$@"
	[ "$quiet" != "y" ] && log_end_msg
}

local_premount()
{
	if [ "${local_premount_used}" != "yes" ]; then
		[ "${quiet?}" != "y" ] && log_begin_msg "Running /scripts/local-premount"
		run_scripts /scripts/local-premount
		[ "$quiet" != "y" ] && log_end_msg
	fi
	local_premount_used=yes
}

local_bottom()
{
	if [ "${local_premount_used}" = "yes" ] || [ "${local_top_used}" = "yes" ]; then
		[ "${quiet?}" != "y" ] && log_begin_msg "Running /scripts/local-bottom"
		run_scripts /scripts/local-bottom
		[ "$quiet" != "y" ] && log_end_msg
	fi
	local_premount_used=no
	local_top_used=no
}

# $1=device ID to mount
# $2=optionname (for root and etc)
# $3=panic if device is missing (true or false, default: true)
# Sets $DEV to the resolved device node
local_device_setup()
{
	local dev_id="$1"
	local name="$2"
	local may_panic="${3:-true}"
	local real_dev
	local time_elapsed
	local count

# If wait-for-root understands this prefix, then use it to wait for
	# the device rather than settling the whole of udev.

# Timeout is max(30, rootdelay) seconds (approximately)
	local slumber=30
	case $DPKG_ARCH in
		powerpc|ppc64|ppc64el)
			slumber=180
			;;
		*)
			slumber=30
			;;
	esac
	if [ "${ROOTDELAY:-0}" -gt $slumber ]; then
		slumber=$ROOTDELAY
	fi

case "$dev_id" in
	UUID=*|LABEL=*|PARTUUID=*|/dev/*)
		FSTYPE=$( wait-for-root "$dev_id" "$slumber" )
		;;
	*)
		wait_for_udev 10
		;;
	esac

# Load ubi with the correct MTD partition and return since fstype
	# doesn't work with a char device like ubi.
	if [ -n "$UBIMTD" ]; then
		modprobe ubi "mtd=$UBIMTD"
		DEV="${dev_id}"
		return
	fi

# Don't wait for a device that doesn't have a corresponding
	# device in /dev and isn't resolvable by blkid (e.g. mtd0)
	if [ "${dev_id#/dev}" = "${dev_id}" ] &&
	   [ "${dev_id#*=}" = "${dev_id}" ]; then
		DEV="${dev_id}"
		return
	fi

# If the root device hasn't shown up yet, give it a little while
	# to allow for asynchronous device discovery (e.g. USB).  We
	# also need to keep invoking the local-block scripts in case
	# there are devices stacked on top of those.
	#
	# in Ubuntu, we should never actually enter this loop as wait-for-root
	# above should have waited until the device appeared.
	if ! real_dev=$(resolve_device "${dev_id}") ||
	   ! get_fstype "${real_dev}" >/dev/null; then
		log_begin_msg "Waiting for ${name}"

while true; do
			sleep 1
			time_elapsed="$(time_elapsed)"

local_block "${dev_id}"

# If mdadm's local-block script counts the
			# number of times it is run, make sure to
			# run it the expected number of times.
			mdadm_exec=0
			while true; do
				if [ -f /run/count.mdadm.initrd ]; then
					count="$(cat /run/count.mdadm.initrd)"
				elif [ -n "${count}" ]; then
					# mdadm script deleted it; put it back
					count=$((count + 1))
					echo "${count}" >/run/count.mdadm.initrd
				else
					break
				fi
				if [ "${count}" -ge "${time_elapsed}" ]; then
					break;
				fi

# Track that mdadm was executed to force
				# cryptroot execution after the loop, see
				# LP #1879980.
				mdadm_exec=1
				/scripts/local-block/mdadm "${dev_id}"

# Cryptroot must run here, see LP #1879980.
				# The counter is inc/dec on cryptroot script!
				if [ -f /run/cryptroot.initrd.cnt ]; then
					crypt_cnt=$(cat /run/cryptroot.initrd.cnt)
					if [ "${crypt_cnt}" -gt 0 ]; then
						/scripts/local-block/cryptroot "${dev_id}"
					fi
				fi
			done

# Extra cryptroot run after mdadm loop in order to
			# start encrypted volumes on top of RAID arrays.
			if [ -f /run/cryptroot.initrd.cnt ]; then
				crypt_cnt=$(cat /run/cryptroot.initrd.cnt)
				if [ "${crypt_cnt}" -gt 0 ] || [ ${mdadm_exec} -ne 0 ]; then
					/scripts/local-block/cryptroot "${dev_id}"
				fi
			fi

if real_dev=$(resolve_device "${dev_id}") &&
			   get_fstype "${real_dev}" >/dev/null; then
				wait_for_udev 10
				log_end_msg 0
				break
			fi
			if [ "${time_elapsed}" -ge "${slumber}" ]; then
				log_end_msg 1 || true
				break
			fi
		done
	fi

# We've given up, but we'll let the user fix matters if they can
	while ! real_dev=$(resolve_device "${dev_id}") ||
	      ! get_fstype "${real_dev}" >/dev/null; do
		if ! $may_panic; then
			echo "Gave up waiting for ${name}"
			return 1
		fi
		echo "Gave up waiting for ${name} device.  Common problems:"
		echo " - Boot args (cat /proc/cmdline)"
		echo "   - Check rootdelay= (did the system wait long enough?)"
		if [ "${name}" = root ]; then
			echo "   - Check root= (did the system wait for the right device?)"
		fi
		echo " - Missing modules (cat /proc/modules; ls /dev)"
		panic "ALERT!  ${dev_id} does not exist.  Dropping to a shell!"
	done

DEV="${real_dev}"
}

local_mount_root()
{
	local_top
	if [ -z "${ROOT}" ]; then
		panic "No root device specified. Boot arguments must include a root= parameter."
	fi
	local_device_setup "${ROOT}" "root file system"
	ROOT="${DEV}"

# Get the root filesystem type if not set
	if [ -z "${ROOTFSTYPE}" ] || [ "${ROOTFSTYPE}" = auto ]; then
		FSTYPE=$(get_fstype "${ROOT}")
	else
		FSTYPE=${ROOTFSTYPE}
	fi

local_premount

if [ "${readonly?}" = "y" ] && \
	   [ -z "$LOOP" ]; then
		roflag=-r
	else
		roflag=-w
	fi

checkfs "${ROOT}" root "${FSTYPE}"

# Mount root
	# shellcheck disable=SC2086
	mount ${roflag} ${FSTYPE:+-t "${FSTYPE}"} ${ROOTFLAGS} "${ROOT}" "${rootmnt?}"
	mountroot_status="$?"
	if [ "$LOOP" ]; then
		if [ "$mountroot_status" != 0 ]; then
			if [ "${FSTYPE}" = ntfs ] || [ "${FSTYPE}" = vfat ]
			then
				panic "
Could not mount the partition ${ROOT}.
This could also happen if the file system is not clean because of an operating
system crash, an interrupted boot process, an improper shutdown, or unplugging
of a removable device without first unmounting or ejecting it.  To fix this,
simply reboot into Windows, let it fully start, log in, run 'chkdsk /r', then
gracefully shut down and reboot back into Windows. After this you should be
able to reboot again and resume the installation.
(filesystem = ${FSTYPE}, error code = $mountroot_status)
"
			fi
		fi

mkdir -p /host
		mount -o move "$rootmnt" /host

while [ ! -e "/host/${LOOP#/}" ]; do
			panic "ALERT!  /host/${LOOP#/} does not exist.  Dropping to a shell!"
		done

# Get the loop filesystem type if not set
		# shellcheck disable=SC2153
		FSTYPE="$LOOPFSTYPE"
		if [ -z "$FSTYPE" ] || [ "$FSTYPE" = "unknown" ]; then
			FSTYPE=$(/sbin/blkid -s TYPE -o value "/host/${LOOP#/}")
			[ -z "$FSTYPE" ] && FSTYPE="unknown"
		fi

if [ "$readonly" = y ]; then
			roflag=-r
		else
			roflag=-w
		fi

# FIXME This has no error checking
		modprobe loop

# FIXME This has no error checking
		# shellcheck disable=SC2086
		mount ${roflag} -o loop -t ${FSTYPE} ${LOOPFLAGS} "/host/${LOOP#/}" "${rootmnt?}"

if [ -d "$rootmnt/host" ]; then
			mount -o move /host "$rootmnt/host"
		fi
	fi
}

local_mount_fs()
{
	read_fstab_entry "$1"

local_device_setup "$MNT_FSNAME" "$1 file system"
	MNT_FSNAME="${DEV}"

local_premount

if [ "${readonly}" = "y" ]; then
		roflag=-r
	else
		roflag=-w
	fi

if [ "$MNT_PASS" != 0 ]; then
		checkfs "$MNT_FSNAME" "$MNT_DIR" "${MNT_TYPE}"
	fi

# Mount filesystem
	if ! mount ${roflag} -t "${MNT_TYPE}" -o "${MNT_OPTS}" "$MNT_FSNAME" "${rootmnt}${MNT_DIR}"; then
		panic "Failed to mount ${MNT_FSNAME} as $MNT_DIR file system."
	fi
}

mountroot()
{
	local_mount_root
}

mount_top()
{
	# Note, also called directly in case it's overridden.
	local_top
}

mount_premount()
{
	# Note, also called directly in case it's overridden.
	local_premount
}

mount_bottom()
{
	# Note, also called directly in case it's overridden.
	local_bottom
}

📁 Sid Gifari File Manager